Tile Installer in Santa Clara, Utah
Steve Barton of Tile & Stone Installation is a licensed tile setter based in Santa Clara, Utah. He installs tile showers, custom shower pans, tub surrounds, bathroom floors, backsplashes and stone for Santa Clara homeowners. He holds Utah contractor license #14232584-5501 and has more than 12 years of experience. Call or text 435-288-3868.
Licensed Utah contractor #14232584-5501 · Estimates available on request · Updated November 5, 2026

- Licensed in UtahContractor #14232584-5501
- 12+ Yearsof tile & stone work
- Based in Santa Claraserving Southern Utah
- Call or Text435-288-3868
Key Takeaways
- Santa Clara is Steve's Utah home base, so Santa Clara projects are close to home.
- Steve builds custom tile showers on a hand-sloped mortar bed, including curbless and walk-in designs.
- A custom tile shower costs more than an acrylic insert, but it fits any size and any tile.
- Steve never sets new tile over old tile. He removes it and checks what is underneath.
- Estimates are available on request. Text photos to 435-288-3868.
Who installs tile in Santa Clara, Utah?
Steve Barton of Tile & Stone Installation installs tile in Santa Clara homes, and Santa Clara is where he is based in Utah. He holds Utah contractor license #14232584-5501 (class S230) and has more than 12 years of experience.
Santa Clara sits just west of St. George in Washington County. Steve also works in St. George, Washington, Hurricane and towns north along I-15.
You talk directly with the tile setter. Call or text 435-288-3868 and send a few photos of the space.
Tile work in Santa Clara
- Tile showersWalk-in, low-curb and curbless showers with niches and benches.
- Custom shower pansHand-sloped mortar beds with waterproofing, sized to the shower.
- Tub surroundsTile around standard, soaking and jetted tubs.
- Bathroom floors & wallsPorcelain, ceramic, marble and travertine.
- Backsplashes & fireplacesKitchen backsplashes and fireplace surrounds.
- Patios & stoneworkTravertine and natural stone outdoors.
What makes a tile shower last in a Santa Clara home?
A tile shower lasts when the hidden layers under the tile are built right. The tile you see is only the top layer. What keeps water out of your walls and floor is the shower pan and the waterproofing.
- Slope. The shower floor must slope toward the drain. Plumbing codes such as the International Plumbing Code call for at least 1/4 inch of slope per foot.
- Waterproofing. Grout lets some water through, so a waterproof layer under the tile sends that water to the drain.
- A clean start. Old tile comes out so the base can be checked and repaired. Steve never sets new tile over old tile.
- Hard water care. The City of St. George says most Southern Utah water is hard, so easy-to-clean tile and sealed stone pay off in Santa Clara too.
Want the full explanation? Read our guide, What is a shower pan, and why does it matter?
Custom tile shower, prefab pan or acrylic insert: which is right for you?
Each option fits a different budget and bathroom. Here is how they compare.
| Option | Best for | Pros | Cons |
|---|---|---|---|
| Custom tile shower on a mortar-bed pan | Best for Any size or shape, walk-in and curbless showers | Fits the exact space. Any drain location. Any tile. | Costs more and takes longer than an insert. |
| Tile shower on a prefab pan | Best for Standard-size showers | Faster to install. Built-in slope. | Limited sizes and drain positions. |
| Acrylic or fiberglass insert | Best for Rentals and quick, low-cost updates | Lowest cost. Quick to install. | Plain look. Hard to repair if it cracks. Not tile. |
Steve builds custom tile showers. If an insert fits your budget better, a general contractor or bath company is usually the right call.
What does Steve's tile work look like?
These photos show bathroom tile and stone work by Steve. They show the level of detail Santa Clara homeowners can expect.




Is Tile & Stone Installation right for your Santa Clara project?
A good fit in Santa Clara
- A new custom tile shower or tub surround
- Replacing a fiberglass surround with tile
- Bathroom floors and walls in tile or stone
- A backsplash, fireplace or stone patio
Hire someone else for
- A full remodel that moves walls or plumbing (hire a general contractor)
- Electrical work
- Hardwood floors
- Acrylic shower inserts
How much does tile installation cost in Santa Clara?
Tile installation in Santa Clara is priced per project, and estimates are available on request. Steve does not post set prices, because the cost of a tile job depends on the space and the tile you choose.
These things change the price the most:
- Size of the area. More square feet means more tile, more setting material and more labor.
- Tile type and size. Small mosaics and natural stone take longer to set than large porcelain tile.
- Tear-out. Removing old tile and repairing what is underneath adds time.
- Shower details. A custom shower pan, a bench or recessed niches add work.
- Layout. Diagonal, herringbone and border patterns need more cuts than a straight layout.
You can buy your own tile, or Steve can help you choose tile and figure out how much you need. Payment is by Zelle, cash or check. Credit cards and Venmo are not accepted.
For a starting idea, text photos of the space and the town you live in to 435-288-3868.
What happens after you call or text?
Three simple steps. The fastest start is a text with photos.
Call or text
Call or text 435-288-3868. Send a few photos of the space and tell Steve which town you are in.
Photos & scheduling by text
Steve reviews your photos and handles scheduling by text. Estimates are available on request.
Installation
Steve handles tear-out, surface prep and installation, and keeps you updated until the last tile is set.
Is Steve a licensed contractor in Utah?
Yes. Steve Barton holds Utah contractor license #14232584-5501, issued by the Utah Division of Professional Licensing (DOPL). His license class is S230. Under Utah rules, S230 covers the installation of tile, ceramic, marble, granite, natural stone and shower pans (Utah Admin. Code R156-55a-301, contractor license classifications).
You can check any Utah contractor license for free on the Utah Division of Professional Licensing license lookup.
Steve has more than 12 years of experience setting tile and stone. Plumbing and electrical work need their own licensed trades, and hardwood flooring falls under a different Utah license class, so those are not offered in Utah.
Santa Clara Tile Installation FAQ
Are you really based in Santa Clara?
Yes. Santa Clara is Steve's Utah home base. He works at customers' homes, so there is no office or showroom to visit.
Do you build curbless showers?
Yes. Steve builds curbless, low-curb and curbed showers on a custom mortar-bed pan, with a center or linear drain.
Can you replace a fiberglass tub surround with tile?
Yes. Steve removes the old surround, prepares the walls and installs a tile surround. Moving or replacing plumbing fixtures needs a licensed plumber.
Do you also work in St. George?
Yes. St. George is a short drive from Santa Clara. See our St. George tile installation page for details.
Can I buy my own tile?
Yes. Many homeowners pick their own tile. Steve can also help you choose tile and figure out how much you need.
How do I get an estimate?
Text photos of the job to 435-288-3868. Steve reviews the photos and handles scheduling by text. Estimates are available on request.
Other Southern Utah Towns We Serve
Helpful guides: What is a shower pan? · Why choose travertine for a pool deck? · Choosing kitchen backsplash tile · Replacing carpet with tile
Start Your Santa Clara Tile Project
Call or text Steve directly at 435-288-3868. Send a few photos of the space and he will let you know what it needs.
- City of St. George 2023 Water Quality Report
- Utah Admin. Code R156-55a-301, contractor license classifications
- Utah Division of Professional Licensing license lookup
Written by Tile & Stone Installation from Steve Barton's work as a licensed tile setter. Last updated November 5, 2026.